Add a Data Source
Set up WebDAV, FTP, SFTP, or S3-compatible storage as a sync data source.
Koodo Reader supports WebDAV, FTP, SFTP, and S3-compatible object storage as data sources. Choose the service you use and follow the steps below.
Add Jianguoyun WebDAV
-
Register a Jianguoyun account at https://www.jianguoyun.com/. Free accounts receive 1 GB of upload traffic and 3 GB of download traffic per month.
-
Get your WebDAV credentials: see Jianguoyun's WebDAV authorization guide.
-
Create a folder named
KoodoReaderin the root of your drive. -
Open Koodo Reader, go to Settings → Sync & Backup → Add Data Source, and select WebDAV from the dropdown.

-
Server address: https://dav.jianguoyun.com/dav/
-
Server path: the
KoodoReaderfolder you just created. -
Username: the account you obtained at https://www.jianguoyun.com/#/safety

-
Password: the app password you created at https://www.jianguoyun.com/#/safety

-
Click Test to check the WebDAV connection.

-
If the test succeeds, click Bind.
-
Close Settings and click the Sync button at the top of Koodo Reader.

-
After the sync completes, your data is uploaded to Jianguoyun.

Add 123Pan WebDAV
-
Register a 123Pan account, open Third-party Mount, and obtain the WebDAV address and credentials. This feature requires a VIP plan.

-
Add an application and get the WebDAV password.
-
Create a folder named
KoodoReaderin the root of your drive. -
In Koodo Reader, go to Settings → Sync & Backup → Add Data Source and select WebDAV.
-
Click Test to check the WebDAV connection.

-
If the test succeeds, click Bind.
-
Close Settings and click the Sync button at the top of Koodo Reader.

-
After the sync completes, your data is uploaded to 123Pan.

Add CTFile WebDAV
-
Register a CTFile account, open WebDAV, and obtain the WebDAV address. Your CTFile username and password are used as the WebDAV credentials. This feature requires a VIP plan.

-
Create a folder named
KoodoReaderin the root of your drive. -
In Koodo Reader, go to Settings → Sync & Backup → Add Data Source and select WebDAV.
-
Click Test to check the WebDAV connection.

-
If the test succeeds, click Bind.
-
Close Settings and click the Sync button at the top of Koodo Reader.

-
After the sync completes, your data is uploaded to CTFile.

Add Synology WebDAV
-
Install the WebDAV Server package from Package Center.

-
Enable HTTP.

-
Create a shared folder: open Control Panel → Shared Folder.

-
Click Create in the upper-left corner, name the folder
KoodoReader, keep the default settings, and apply the default folder permissions.
-
In Koodo Reader, go to Settings → Sync & Backup → Add Data Source and select WebDAV.

-
Server address:
http://[Synology LAN IP]:5005. The LAN IP is the address you use to open Synology.
-
Server path: the shared folder name
KoodoReader. -
Username and password: your Synology DSM credentials.
-
Click Test to check the connection.

-
If the test succeeds, click Bind.
-
Close Settings and click the Sync button at the top of Koodo Reader.

-
After the sync completes, your data is uploaded to Synology.

Add FTP
The example below uses Synology FTP; other FTP providers work the same way.
-
Go to Control Panel → File Services.

-
Enable the FTP service.

-
Create a shared folder: open Control Panel → Shared Folder.

-
Click Create, name the folder
KoodoReader, keep the default settings, and apply the default folder permissions.
-
In Koodo Reader, go to Settings → Sync & Backup → Add Data Source and select FTP.

-
Server address: the Synology LAN IP.

-
Server port:
21. -
Server path: the shared folder name
KoodoReader. -
Username and password: your Synology DSM credentials.
-
Use SSL: this depends on your FTP provider. For a NAS or self-hosted server reached by IP address, set it to
0. Otherwise, follow your provider's instructions. -
Click Test to check the connection.

-
If the test succeeds, click Bind.
-
Close Settings and click the Sync button at the top of Koodo Reader.

-
After the sync completes, your data is uploaded to Synology.

Add SFTP
The example below uses Synology SFTP; other SFTP providers work the same way.
-
Go to Control Panel → File Services.

-
Enable the SFTP service.

-
Create a shared folder: open Control Panel → Shared Folder.

-
Click Create, name the folder
KoodoReader, keep the default settings, and apply the default folder permissions.
-
In Koodo Reader, go to Settings → Sync & Backup → Add Data Source and select SFTP.

-
Server address: the Synology LAN IP.

-
Server port:
22. -
Server path: the shared folder name
KoodoReader. -
Username and password: your Synology DSM credentials.
-
Click Test to check the connection.

-
If the test succeeds, click Bind.
-
Close Settings and click the Sync button at the top of Koodo Reader.

-
After the sync completes, your data is uploaded to Synology.

Add S3-Compatible Storage
Object storage providers vary, so this example uses Synology C2.
-
Register an account at https://login.c2.synology.com/sso/login.
-
Click Create Bucket in the upper-right corner.
-
Enter a bucket name (letters, numbers, and hyphens are allowed), select Create Access Key, and click Next.

-
Keep the defaults on the next page and click Create Bucket.

-
The next page shows the Access Key ID and Secret Key. Click Download access key ID & secret key.

-
In Koodo Reader, go to Settings → Sync & Backup → Add Data Source and select S3-compatible storage.

-
Enter the Endpoint shown below.

-
Enter the Region portion of the endpoint.

-
Enter the BucketName.

-
Open the bucket, click Create Folder in the upper-right corner, enter
KoodoReader, and click Create.
-
Enter
KoodoReaderin the path field. -
Enter the downloaded Access Key ID and Secret Key in the last two fields and click Test.

-
If the test succeeds, click Bind.
-
Close Settings and click the Sync button at the top of Koodo Reader.

-
After the sync completes, your data is uploaded to Synology C2.
